Initiation Decision Due Soon on AD/CVD Petitions on Mattresses
A decision is due soon from the Commerce Department on whether to begin new antidumping duty investigations on mattresses from Bosnia, Bulgaria, Burma, India, Italy, Kosovo, Mexico, Philippines, Poland, Slovenia, Spain, and Taiwan, as well as a countervailing duty investigation on mattresses from Indonesia. The agency is nearing the end on Aug. 17 of the 20 day period it has to review petitions filed July 28 by a group of domestic mattress manufacturers and labor unions.
According to the petitions, mattress imports from the 13 countries come as a "third wave" of imports that "country hopped" following the imposition of AD orders on mattresses from China in 2019, and the imposition in 2021 of countervailing duties on mattresses from China, as well as AD duty orders on mattresses from Cambodia, Indonesia, Malaysia, Serbia, Thailand, Turkey and Vietnam.
If initiated, the investigations could result in the imposition of permanent AD/CVD orders and the assessment of AD/CVD on importers. The petition was filed by Brooklyn Bedding; Carpenter Company; Corsicana Mattress Company; Future Foam; FXI; Kolcraft Enterprises; Leggett & Platt; Serta Simmons Bedding; Southerland; Tempur Sealy International; and the Teamsters and United Steelworkers labor unions.
Proposed Scope
The petition proposes the following scope for the investigations:
"The products covered by these petitions are all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses also may contain (1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress, or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or (2) “ticking,” the outermost layer of fabric or other material (e.g., vinyl) that encloses the core and any upholstery, also known as a cover.
The scope of these petitions is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of size and size description.
The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units.
“Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams (e.g., polyurethane, memory (viscoelastic), latex foam, gel infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling.
Mattresses covered by the scope of these petitions may be imported independently, as part of furniture or furniture mechanisms (e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set (in combination with a “mattress foundation”). “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set, in combination with a mattress foundation.
Excluded from the scope of these petitions are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon.
Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress.
Also excluded is certain multifunctional furniture that is convertible from seating to sleeping, regardless of filler material or components, where such filler material or components are upholstered, integrated into the design and construction of, and inseparable from, the furniture framing, and the outermost layer of the multifunctional furniture converts into the sleeping surface. Such furniture may, and without limitation, be commonly referred to as “convertible sofas,” “sofabeds,” “sofa chaise sleepers,” “futons,” “ottoman sleepers,” or a like description.
Also excluded from the scope of these petitions are any products covered by the existing antidumping duty orders on uncovered innerspring units from China, South Africa, and Vietnam. See Uncovered Innerspring Units from the People’s Republic of China, South Africa, and Socialist Republic of Vietnam: Continuation of Antidumping Duty Orders, 84 Fed. Reg. 55285 (Oct. 16, 2019).
Also excluded from the scope of these orders are bassinet pads with a nominal length of less than 39 inches, a nominal width of less than 25 inches, and a nominal depth of less than 2 inches.
Additionally, also excluded from the scope of these petitions are “mattress toppers.” A “mattress topper” is a removable bedding accessory that supplements a mattress by providing an additional layer that is placed on top of a mattress. Excluded mattress toppers have a height of four inches or less.
The products subject to these petitions are currently classifiable under HTSUS subheadings: 9404.21.0010, 9404.21.0013, 9404.21.0095, 9404.29.1005, 9404.29.1013, 9404.29.1095, 9404.29.9085, 9404.29.9087, 9404.29.9095. Products subject to these petitions may also enter under HTSUS subheadings: 9401.41.0000, 9401.49.0000, and 9401.99.9081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to these petitions is dispositive."