AD/CV Duties Requested on Seamless Pipe From Czech Republic, South Korea, Russia and Ukraine
A domestic manufacturer filed a petition July 7 with the Commerce Department and the International Trade Commission requesting new antidumping duties on seamless carbon and alloy steel standard, line and pressure pipe from the Czech Republic, South Korea, Russia and Ukraine, and new countervailing duties on the same products from South Korea and Russia. Commerce will now decide whether to begin AD/CVD investigations on seamless carbon and alloy steel standard, line and pressure pipe that could eventually result in the assessment of AD/CV duties.
The petition was filed Vallourec Star. It requests AD/CV duties on seamless carbon and alloy steel standard, line and pressure pipe under 16 inches in diameter, similar to existing AD/CV duties on China. Other AD duty orders are already in place on seamless carbon and alloy steel standard, line and pressure pipe under 4.5 inches in diameter from Germany, Japan and Romania, and between 4.5 inches and 16 inches in diameter from Japan.
Proposed Scope
The petition proposes the following scope for the investigations:
The merchandise covered by the scope of these investigations is seamless carbon and alloy steel (other than stainless steel) pipes and redraw hollows, less than or equal to 16 inches (406.4 mm) in outside diameter, regardless of wall-thickness, manufacturing process (e.g., hot finished or cold-drawn), end finish (e.g., plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish (e.g., bare, lacquered or coated). Redraw hollows are any unfinished carbon or alloy steel (other than stainless steel) pipe or “hollow profiles” suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials (“ASTM”) or American Petroleum Institute (“API”) specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel (other than stainless steel) standard, line, and pressure pipes produced to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-589, ASTM A-795, ASTM A1024, and the API 5L specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusions discussed below.
Specifically excluded from the scope of the investigations are: (1) all pipes meeting aerospace, hydraulic, and bearing tubing specifications; (2) all pipes meeting the chemical requirements of ASTM A-335, whether finished or unfinished; and (3) unattached couplings. Also excluded from the scope of the investigation are all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness, of ASTM A-53, ASTM A-106 or API 5L specifications.
Subject seamless standard, line, and pressure pipe are normally entered under Harmonized Tariff Schedule of the United States (HTSUS) 7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055, 7304.59.8060, 7304.59.8065, and 7304.59.8070. The HTSUS subheadings and specifications are provided for convenience and customs purposes; the written description of the scope is dispositive.
Commerce Accepting Comments on Petition Support
The Commerce Department is accepting comments on domestic industry support for the petitions to determine whether the petitions meet the dual requirements of support by domestic producers or workers accounting for (1) at least 25% of the total production of the domestic-like product and (2) more than 50% of the production of the domestic-like product produced by that portion of the industry expressing support for, or opposition to, the petition. If the petitions meet these requirements, among others, Commerce will initiate antidumping and countervailing duty investigations. Comments are due by July 27.
Email ITTNews@warren-news.com for a copy of the petitions.